Do you hate the bulky carpet cleaners? These DIY carpet cleaning tips and techniques will teach you how to clean your carpet without the use of a machine.
While vacuuming and rug cleaning may be the most tedious chores on your to-do list, they are still very useful. Our forefathers couldn’t imagine robot vacuum cleaner, but they would have been amazed at upright vacuums which glide effortlessly across the floors.
The self-propelled sweepers in the early 20th century have been replaced by modern vacuums and carpet cleaners. We are fortunate that carpet cleaning doesn’t require a horse-drawn buggy or gas-powered hoses to get in through our windows.
Modern carpet cleaning machines are easy to use and less complicated than ever. professional carpet cleaner companies have mastered the process. There may be times when you don’t need a machine. You might need to clean your carpet quickly, save money or just want to try it to see how it works. Carpet cleaning takes patience and a careful technique.
These are the basic rules for cleaning carpets without using a machine:
- Be sparing with cleaners and soaps
- Wash off any cleaning solution.
- Make sure the carpet is dried properly. A subfloor that is not adequately dried can cause mold and mildew issues.
Spot Cleaning Carpets Without a Machine
You might only need a little spot-cleaning if you are lucky. Two Maids and A Mop Director for Franchise Operations Lauren Bowen recommends a DIY method to remove small or recent carpet stains. Bowen suggests filling a spray bottle with 1/4 Cup white vinegar, 1 tablespoon dish soap, and water. Spray the stain well and then wipe it with a towel until it is gone.
Use a soap or carpet cleaner to clean your carpets. Rinse with warm water to get rid of any suds and then dry thoroughly.
These are some tips to keep in mind.
- It is important to treat stains immediately or when discoloration becomes apparent. Michelle Hansen, a cleaning and organizing expert, suggests Folex Carpet spot Remover as a stain treatment.
- To ensure that your carpets are colorfast, test any cleaning products or solutions. Craig Gjelsten is vice president of operations at Rainbow International Restoration.
- You might feel tempted to use elbow grease as you scrub those spots. Don’t. It is better to use light blotting than heavy-duty rubs. “Rubbing a stain can cause it to spread or soak further into the fabric fibers or carpet,” Leanne Stapf is chief operating officer at The Cleaning Authority. This makes it more difficult to lift the stain. Blot the stain instead with a paper towel or a washcloth. Instead of rubbing the liquid deeper into the fabric, this will absorb it.
Whole-Room Carpet Cleaning without a Machine
Carpet cleaning by hand is time-consuming. It is important to allow enough time, even more than you think, to complete the task.
Diana Rodriguez-Zaba is the president of ServicesMaster by Zaba. She recommends using baking soda and carpet shampoo along with water and towels. This method requires a lot of towels so it is worth asking a friend or family member for old towels.
- To remove any loose dirt, sprinkle baking soda on the carpet. (The baking soda can also be used to eliminate odors.
- In a spray bottle, add two drops of carpet shampoo to warm water. Apply the mixture to the carpet and do not soak the fibers.
- To remove dirt and grime, brush the carpet with a Carpet Brush.
- To remove as much moisture from the area, use dry towels.
- Fill a spray bottle with water, and spray the same area.
- To remove any remaining moisture, use another set of towels to dry it.
- Use a carpet grooming tool to finish your carpet cleaning. Rodriguez-Zaba recommends this rakelike grooming brush that can be used on cut pile carpets. Loop-pile carpets should not be used with this tool.
These are some tips to keep in mind.
- You can speed up drying by choosing a day when your windows are open.
- Move furniture and other items that aren’t necessary before you start cleaning.
- You can start in the corner of the room, and then work your way toward the door or threshold. This will ensure that you don’t have the need to cross over clean areas.
- You can work in smaller sections.
- Rinse thoroughly to get rid of any residue.
